For adults (18+) · Text only · No tracking, no rankings
aitoysex

A plain guide to connected and AI sex toys

Choosing and buying

By the aitoysex.com editorial team

Updated

Body-Safe Materials and Cleaning for Connected Toys

A smart toy can have the cleverest app on the market and still be a poor purchase if the part that touches your body is made of the wrong stuff. Materials and cleaning are unglamorous subjects, and they are the ones that matter most for everyday comfort. This guide gives general consumer information; if you have a skin reaction, an allergy or any health concern, a doctor is the right person to ask.

Porous and non-porous: the key distinction

The most useful single property of a toy material is whether it is porous. A non-porous surface has no tiny openings for fluid to soak into, so washing the surface cleans the toy. A porous surface can hold on to moisture and whatever comes with it, and no amount of surface washing fully reaches inside.

Materials generally regarded as non-porous:

  • Silicone. Soft, flexible, warms quickly and is the most common choice for quality toys. Listings sometimes say “medical grade” or “platinum cured”; these terms are used loosely in marketing, so treat a clear statement of “100% silicone” from a reputable maker as the thing to look for.
  • ABS plastic. Hard and smooth. Often used for handles, cases and the bodies of small vibrators.
  • Glass. Smooth, rigid and easy to clean. Toys should be made from toughened glass intended for the purpose; check for chips before each use.
  • Stainless steel and other polished metals. Heavy, rigid and very durable. People with a known metal allergy should check the exact alloy with the maker.

Materials to treat with more caution:

  • Soft “jelly” and rubber blends, PVC. Often porous and sometimes softened with chemical plasticisers. A strong chemical smell out of the box is a warning sign.
  • TPE and TPR. Soft, stretchy materials widely used for sleeves and strokers. They are usually porous to some degree. Many people use them without problems, but they need more careful cleaning and thorough drying, and they wear out sooner.
  • Anything unnamed. If a listing will not say what the product is made of, assume the answer is not flattering.

Some people use a condom over a porous toy to make cleaning easier. That is a reasonable practice, as long as the lubricant is compatible with both.

Why this matters more for connected toys

Smart toys are often made from several materials: a silicone body, a plastic control section, metal charging contacts, a seam where the halves meet. Each junction is a place where residue can collect. When you look at product photos, prefer designs with few seams and a smooth transition between materials. Removable sleeves, common on stroker-type devices, should come off easily so both parts can dry.

Matching lubricant to material

Lubricant makes use more comfortable and reduces friction on the material itself. Compatibility matters:

Lubricant type Generally fine with Take care with
Water-based All common toy materials Dries out faster; reapply as needed
Silicone-based Glass, metal, hard plastic Silicone toys: many makers advise against it because it can damage the surface
Oil-based Glass, metal Can degrade latex condoms and some soft materials

When in doubt, a plain water-based lubricant is the safe default, and the manufacturer’s instructions overrule any general table, including this one.

Cleaning a toy that has electronics inside

Connected toys cannot be boiled or put in a dishwasher. Heat that is harmless to solid silicone or glass will ruin a battery and a circuit board. The routine that works for most of them:

  1. Check the water rating first. If the manual says splash-proof only, do not hold it under a running tap; use a damp cloth instead. The guide on choosing a smart toy explains IP ratings.
  2. Close the charging port. If there is a cover, press it shut. Magnetic contacts are sealed by design but should still be dried afterwards.
  3. Wash with lukewarm water and a mild, unperfumed soap, or a toy cleaner if the maker recommends one. Pay attention to seams, textures and the area around buttons.
  4. Rinse thoroughly. Soap residue can irritate skin.
  5. Dry completely. Pat with a lint-free cloth and let it air-dry before storing. Trapped moisture is the main cause of smell and of corrosion on charging contacts.
  6. Clean before and after use, not only after.

Avoid alcohol, bleach, acetone and harsh household cleaners unless the manual explicitly allows them. They can make silicone tacky and cloud plastics.

Sleeves made from TPE need extra care: rinse inside and out, let them dry fully with air able to reach the interior, and follow the maker’s advice on any renewing powder. Do not use ordinary talc unless the manual says so.

Storage

  • Store each toy separately. Some soft materials react with each other when left touching and can become sticky or deform.
  • Use the pouch or case it came with, or a clean cotton bag. It keeps dust off and stops buttons being pressed by accident.
  • Keep it away from heat and direct sunlight, which age both the material and the battery.
  • If the toy will sit unused for months, charge it partly from time to time. Rechargeable batteries dislike being left completely empty.

Sharing

If a toy is shared between partners, cleaning between users matters more, and a fresh condom over the toy for each person is a simple extra layer. For questions about infections and how they are passed on, please ask a doctor or a sexual health clinic; that is medical territory and outside what this site can advise on.

When to replace a toy

Retire a toy when the surface is torn, cracked, sticky or permanently discoloured, when a smell does not wash away, when a seam has opened, or when the charging area shows corrosion. A swollen or unusually hot battery means stop using it at once and dispose of it through an electronics recycling point, not the household bin.

Counterfeit products are a particular risk here, because a copied design says nothing about the copied material. See spotting fake stores and counterfeit devices.

Also in Choosing and buying